![]() ![]() Pour several drops of light oil in the rotor casings and move the valves. Taking your horn out of storage and prepping it for playing ought to be as simple as cutting the heavy oil with a very light oil. Best of all, Dri-Case is reusable because it can be regenerated in the oven. ( ) It stores in the case and absorbs the moisture in your case, both protecting the metal from corrosion and the case fabric from mold and mildew. Store it with the slides down and the valves angled so that any condensation that may occur will drain away from the rotors and into the tubes.įinally, I recommend a product called Dri-Case™, sold by Zaja Musical Products. Store your horn in an area that is not too hot or cold, too wet or dry (no attics or basements). Finally, grease the slides as usual and replace them, pushing them all the way in. Put several drops of bearing oil in the leadpipe, clean it out with your snake, and then put a few more drops in the leadpipe. An oil that will not evaporate easily will protect the metal while it sits in storage. Oil both inside the casings and on the bearings. I recommend something heavier such as a 10-weight motor oil or heavier. You can use your bearing oil, sewing machine oil, or 3-in-1 oil. Now, you have to oil the valves with a heavy oil that will have little chance of evaporating. Now, empty all the water from the rest of the horn. The proper method is pretty much the same as putting your horn away for a short period of time, only more so.įirst, take out all the slides (making sure you know how they go back in), and empty all the water. So, what’s the best way to store your horn so it will come out of the closet, ready for use? Or, perhaps you have more than one horn and you want to “mothball” the horns you’re not using. It’s the summer and you might be putting your horn away for a few months. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |